International Perfection Gloss 750ml

International Perfection Gloss 750ml

£52.99 £42.95
You save: £10.04  (18.95%)



Marine Miles:

Marinestore miles reward your loyalty with future discounts at the checkout. 200 miles earned equal a £1 reward discount. T&C’s apply - click here

This item is worth 215 Marine Miles points!

  • Details


International Perfection Gloss 750ml

Ultimate performance two pack polyurethane gloss, extremely hardwearing. Longest lasting gloss will last up to five years. The ultimate in performance, combining excellent chemical and abrasion resistance with superb protection from the detrimental effects of UV. Easy 2:1 mix ratio. For detailed product information refer to

Application Details: - Perfection

  • Finish/Sheen High Gloss
  • Converter/Curing YGA001
  • Thinner/ Cleaner: YTA006 Thinners No.9
  • Number of Coats: 1-2
  • Method of application: Brush/ Roller, NOT SPRAY
Drying/ Overcoating Information:
Temperature ºC
Pot Life
Touch Dry
Overcoating Time
5ºC 5 hours 11 hours 28 hours 4 days
15ºC 3 hours 7 hours 14 hours 3 days
23ºC 2 hours 3 hours 6 hours 2 days
36ºC 1 hour 2 hours 4 hours 1 day

Note: Do not use Perfection on flexible constructions. Will crack on carvel and clinker/ lapstrake hulls. Perfection should not be used over any one-pack products. Not suitable for permanently immersed surfaces.

PREVIOUSLY PAINTED SURFACES: In Good Condition: Wash down with Yacht Line Super Cleaner, rinse with fresh water and allow to dry. Abrade with 280-320 grade (grit) paper.
In Poor Condition: Remove all previous coatings and prime the substrate.
PRIMING: All preparation for bare substrates is covered on the appropriate primer datasheet.
BARE WOOD: Prime with UCP.
STEEL: Prime with Interprotect.
ALUMINIUM: Pre-prime using Etch Primer. Prime with Interprotect.
GRP: Wash down with Yacht Line Super Cleaner, rinse with fresh water and allow to dry. Abrade with 180-220 grade paper. No priming necessary.
ALL SUBSTRATES: Use Perfection Undercoat.

  1. Abrade undercoat (220-320grade) and remove dust.
  2. Stir part A and B well. Mix part A and B in 2:1 mix ratio (do not mix in the same vessel with previous 2.67:1 mix ratio Perfection, and do not apply on the same job).
  3. Add thinner up to 5%, stir and leave for 20 minuets.
  4. Apply 1-2 coats.
  • Do not use unless mixed thoroughly with the curing agent at specified ratio.
  • Stir contents of each part prior to mixing, add Curing Agent to the Base, stir and leave for 10 minutes to allow bubbles to disperse.
  • When applying by roller smooth off with a pad or brush.
  • For lighter colours, mix the first coat of finish 50:50 with the undercoat to improve the depth of colour and opacity.
  • Avoid painting in direct sunlight.
  • Avoid applying late in the evening as condensation can cause a loss of gloss during overnight cure.
Ventilation and Humidity Control:
  • Apply in dry, well ventilated conditions.
  • Avoid excessively humid conditions, over 80% relative humidity.
  • Product temperature should be minimum 15°C and maximum 35°C.
  • Ambient temperature should be minimum 5°C and maximum 30°C.
  • Substrate temperature should be minimum 5°C and maximum 30°C.
Coverage: 9m²/ 750ml

HELPLINE: 02380 21 31 46 - . For Safety Data Sheet please click here.

Available in the UK ONLY
Due to shipping restrictions on this product we can only economically deliver this to UK destinations.
It is possible to ship overseas but the cost can be very high.
We can provide a quote for this, please contact us.

Product Reviews

★★★★★ ★★★★★
4.40/5 Stars out of 5 Reviews
Verified Buyer
Acerinvest | February 1st, 2013
Very expensive but a good product and Marine Store offer a better price than anuone else.
Verified Buyer
martinlumley | April 8th, 2013
Excellent product and Paul in the Burnham shop was very helpful with advice on what was best for the application required
Verified Buyer
(5) | September 14th, 2013
Goes on very easily &40;quite thin without thinners&41; and brush marks tend to disappear with some laying off with the brush. High gloss finish. Expensive but covers a good area.
Verified Buyer
fairlamb | October 27th, 2014
Fast delivery, well packaged goods
Verified Buyer
igytom | January 7th, 2015
This is an excellent paint. Long enough drying time, perfect white and nice shiny gloss finish. Easy to mix if smaller quantities are needed. It felt a bit runny though, even if I applied carefully a very thin coat.