International Interdeck - Slip Resistant Deck Paint 750ml
Processing...

International Interdeck - Slip Resistant Deck Paint 750ml

£26.69 £23.95
You save: £2.74  (10.27%)

plyjb000-750x

Qty


Marine Miles:

Marinestore miles reward your loyalty with future discounts at the checkout. 200 miles earned equal a £1 reward discount. T&C’s apply - click here

This item is worth 120 Marine Miles points!

  • Details

Description

Interdeck is a tough polyurethane low sheen deck coating containing a fine mineral aggregate providing a hard wearing, slip resistant surface. It is easy to apply, by brush or roller, on all substrates. For detailed product information refer to www.yachtpaint.com.

Application Details: - Interdeck

  • Area: Above the waterline
  • Finish/Sheen: Low Sheen
  • Thinner/ Cleaner: YTA800 Thinners No.1
  • Number of Coats: 1-2
  • Method of application: Brush, Roller.
Drying/ Overcoating Information:
Temperature ºC
Touch Dry
Overcoating Time
Walk-on Time
Minimum
Maximum
5ºC 5 hours 24 hours 4 days
4 days
15ºC 4 hours 20 hours 3 days 3 days
23ºC 3 hours 16 hours 2 days 2 days
36ºC 2 hours 12 hours 1 day 1 day

Preparation:
Note: Not suitable for permanently immersed surfaces. Do not clean with highly alkaline cleaners.

PREVIOUSLY PAINTED SURFACES: In Good Condition: Wash down with Yacht Line Super Cleaner, rinse with fresh water and allow to dry. Abrade with 220-320 grade (grit) paper.
In Poor Condition: Remove all previous coatings and prime the substrate.
PRIMING: All preparation for bare substrates is covered on the appropriate primer datasheet.
BARE WOOD: Prime with Yacht Primer or UCP.
STEEL: Prime with Yacht Primer or Interprotect.
ALUMINIUM: Pre-prime using Etch Primer, then prime with Yacht Primer or Interprotect.
GRP: Wash down with Yacht Line Super Cleaner, rinse with fresh water and allow to dry. Abrade with 180-220 grade paper. No priming necessary.
ALL SUBSTRATES: If any filling is required use the appropriate product from the Interfill range.

Application:
  1. Abrade the primer using 180-280 grade wet or dry paper and remove dust.
  2. Apply 1-2 coats of Brightside in dry, well ventilated conditions.
  • Stir well before use.
  • Other For best results either stipple by brush or use a mohair roller.
Coverage: 7m²/ 750ml

Temperature Range:

  • Product temperature should be minimum 10°C and maximum 30°C.
  • Ambient temperature should be minimum 5°C/40°F and maximum 35°C/95°F.
  • Substrate temperature should be minimum 5°C/40°F and maximum 35°C/95°F.

HELPLINE: 02380 21 31 46 - www.yachtpaint.com For Safety Data Sheet please click here.

Product Reviews

★★★★★ ★★★★★
4.70/5 Stars out of 10 Reviews
5
8
4
1
3
1
2
0
1
0
Pages 1   2
Verified Buyer
(5)
guest | December 8th, 2011
I ordered this on the tuesday and it came by wednesday! Super fast shipping and such excellent and friendly customer service. Will definately shop here agin.
Verified Buyer
(5)
guest | January 17th, 2012
Good product for ramps
Verified Buyer
(4)
thunderer | February 1st, 2012
I give this product 4 stars.
Verified Buyer
(5)
guest | February 10th, 2012
I give this product 5 stars.
Verified Buyer
(5)
guest | February 10th, 2012
non-slip others arn't beware!!!