International Danboline Locker and Bilge Paint 750ml

International Danboline Locker and Bilge Paint 750ml

£22.99 £19.99
You save: £3.00  (13.05%)



Marine Miles:

Marinestore miles reward your loyalty with future discounts at the checkout. 200 miles earned equal a £1 reward discount. T&C’s apply - click here

This item is worth 100 Marine Miles points!

  • Details


International bilge and locker paint750ml

Danboline provides a high opacity, hardwearing high sheen finish which is easily cleaned. It can be applied to wood, steel, aluminium or GRP. For detailed product information refer to

Application Details: - Danboline

  • Area: Above the waterline
  • Finish/Sheen: High Sheen
  • Thinner/ Cleaner: YTA800 Thinners No.1
  • Number of Coats: 1-2
  • Method of application: Brush, Roller, Conventional Spray.
Drying/ Overcoating Information:
Temperature ??C
Touch Dry
Overcoating Time
5??C 16 hours 36 hours 4 days
15??C 8 hours 24 hours 3 days
23??C 6 hours 16 hours 2 days
35??C 3 hours 12 hours 1 day

Note: Not suitable for permanently immersed surfaces.

PREVIOUSLY PAINTED SURFACES: In Good Condition: Wash down with Yacht Line Super Cleaner, rinse with fresh water and allow to dry. Abrade with 180-280 grade (grit) paper.
In Poor Condition: Remove all previous coatings and prime the substrate.
PRIMING: All preparation for bare substrates is covered on the appropriate primer datasheet.
BARE WOOD: Prime with Yacht Primer or UCP.
STEEL: Prime with Yacht Primer or Interprotect.
ALUMINIUM: Pre-prime using Etch Primer, then prime with Yacht Primer or Interprotect.
GRP: Wash down with Yacht Line Super Cleaner, rinse with fresh water and allow to dry. Abrade with 180-220 grade paper. No priming necessary. Particular attention should be given to the reverse side of moulded GRP.

  1. Abrade the primer using 180-280 grade wet or dry paper and remove dust.
  2. Apply 1-2 coats of Brightside in dry, well ventilated conditions.
  • Stir well before use.
  • For added protection against moisture absorption and osmosis in bilges, use Gelshield 200.
Coverage: 8m??/ 750ml

HELPLINE: 02380 21 31 46 - For Safety Data Sheet please click here.

Available in the UK ONLY
Due to shipping restrictions on this product we can only economically deliver this to UK destinations.
It is possible to ship overseas but the cost can be very high.
We can provide a quote for this, please contact us.

Product Reviews

★★★★★ ★★★★★
4.33/5 Stars out of 3 Reviews
Verified Buyer
guest | February 10th, 2012
best bilge paint by far
Verified Buyer
twiston21 | June 26th, 2012
Its a great product cant be beat
Verified Buyer
davidlmanning | March 12th, 2013
I give this product 3 stars.