International Pre-Kote Undercoat 375 ml - White Only
Processing...

International Pre-Kote Undercoat 375 ml - White Only

£12.99 £11.60
You save: £1.39  (10.70%)

plyub000-375

Qty


Marine Miles:

Marinestore miles reward your loyalty with future discounts at the checkout. 200 miles earned equal a £1 reward discount. T&C’s apply - click here

This item is worth 60 Marine Miles points!

  • Details

Description

Pre-Kote is an undercoat for one pack finishes such as Toplac, Brightside® and Interlux® Super. Pre-Kote offers excellent obliteration which in turn, allows for easy colour changing. Pre-Kote is designed around tough, flexible resins which means it is long lasting and easy to apply and rub down, providing a smooth base for the finishing coat. It is available in a range of colours to complement the topcoat. For detailed product information refer to www.yachtpaint.com.

Application Details: - Pre-Kote

  • Area: Above the waterline
  • Finish/Sheen: Low-sheen
  • Thinner/ Cleaner: YTA800 Thinners No.1
  • Number of Coats: 1-2.
  • Method of application: Brush, Roller, Airless or Conventional Spray.
Drying/ Overcoating Information:
Temperature ºC
Touch Dry
Overcoating Time
Sandable Time
Minimum
Maximum
5ºC 4 hours 48 hours 4 days
48 hours
15ºC 3 hours 24 hours 3 days 30 hours
23ºC 2 hours 16 hours 2 days 24 hours
35ºC 1 hour 8 hours 1 day 24 hours

Preparation:
Note: Not suitable for permanently immersed surfaces. Only overcoat with one-pack paints.

PREVIOUSLY PAINTED SURFACES: In Good Condition: Wash down with Yacht Line Super Cleaner, rinse with fresh water and allow to dry. Abrade with 280-320 grade (grit) paper.
In Poor Condition: Remove all previous coatings and prime the substrate.
PRIMING: All preparation for bare substrates is covered on the appropriate primer datasheet.
BARE WOOD: Prime with Yacht Primer or UCP.
STEEL: Prime with Yacht Primer or Interprotect.
ALUMINIUM: Pre-prime using Etch Primer, then prime with Yacht Primer or Interprotect.
GRP: Wash down with Yacht Line Super Cleaner, rinse with fresh water and allow to dry. Abrade with 180-220 grade paper. No priming necessary.

Application:
  1. If any filling required use the appropriate product from the Interfill range.
  2. If maximum overcoating time of previous coating/ primer is exceeded, abrade using 180-220 grade wet or dry paper and remove dust.
  3. Apply 1-2 coasting dry, well ventilated conditionals.
  • Stir well before use.
  • To give extra depth of colour, Toplac or Interlux Super enamels may be added.
Coverage: 4.5m²/ 375ml

HELPLINE: 02380 21 31 46 - www.yachtpaint.com For Safety Data Sheet please click here.

Product Reviews

No Reviews Yet!